通風管道的安裝比較重要的是細節方面的因素，要保證好整體的使用效果，就要在安裝上多下功夫，包括安裝前的前提以及安裝規定，這兩方面的要求都要注意，接下來濟南通風管道加工人員為您講解這方面內容。

The installation of ventilation pipes is more important for the details. To ensure the overall use effect, more efforts should be made on the installation, including the premise and installation regulations before installation. Attention should be paid to these two requirements. Next, the ventilation pipe processing personnel in Jinan will explain this aspect to you.

安裝的前提條件：

Prerequisites for installation:

1.完成建筑圍護結構施工，所有障礙物和雜物，地面雜物。

1. Complete the construction of building envelope, remove all obstacles and sundries, and remove the ground sundries.

2.安裝凈化系統風道時，建筑物內部構件的地板已準備好，墻體混凝土已找平，需要在無灰塵或室內情況下進行防塵措施。

2. When installing the air duct of the purification system, the floor of the internal components of the building has been prepared and the concrete of the wall has been leveled. It is necessary to take dust-proof measures when there is no dust or indoors.

3.安裝現場的輔助材料需要齊全，施工技術人員應提供質量和技術指導。

3. Auxiliary materials on the installation site shall be complete, and construction technicians shall provide quality and technical guidance.

通風管道安裝規定：

Ventilation duct installation regulations:

1.風管內嚴禁跨越其他管道;

1. It is forbidden to cross other pipes in the air duct;

2.安裝在易燃易爆環境中的風管應良好接地;穿過生活區或生產區的風管需要嚴格安裝，不能安裝風管接口。

2. Air ducts installed in flammable and explosive environment shall be well grounded; The air duct passing through the living area or production area shall be strictly installed, and the air duct interface shall not be installed.

3.室外垂直風道的固定不得與避雷針或房屋防雷設施連接。

3. The fixing of outdoor vertical air duct shall not be connected with lightning rod or house lightning protection facilities.

4.風管的安裝需要符合以下技術規定：

4. The installation of air duct shall meet the following technical requirements:

(1)風管與通風設備及附件的連接配置不得減少連接部位的連接管。

(1) The connecting configuration of air duct and ventilation equipment and accessories shall not reduce the connecting pipes at the connecting parts.

(2)吊架不得設置在風口、風閥、檢查門和自動控制機構處，也不得固定在法蘭上，以免風道變形影響風道功能。

(2) The hanger shall not be set at the air outlet, air valve, inspection door and automatic control mechanism, nor fixed on the flange, so as to prevent the deformation of the air duct from affecting the function of the air duct.

(3)吊架安裝需要符合相應的安裝規定。懸掛的風管和部件應設有防止擺動的固定點，如固定支架、支撐架等。固定點的位置和數量應根據系統確定。根據輸送空氣的溫度，法蘭墊的材料和厚度會有所不同。風管及其部件穿過墻壁和屋頂時，應設置雨罩。當穿過屋頂的風道超過1.5m時，應為拉索。拉索應為鍍鋅或鋼絲繩。

(3) The installation of hangers shall comply with relevant installation regulations. The suspended air ducts and components shall be provided with fixed points to prevent swinging, such as fixed supports and support frames. The location and number of fixing points shall be determined according to the system. The material and thickness of the flange gasket will vary according to the temperature of the conveying air. When air ducts and their components pass through walls and roofs, rain covers shall be provided. When the air duct passing through the roof exceeds 1.5m, it shall be cable. The cable shall be galvanized or steel wire rope.

以上就是通風管道的施工的前提及其裝置時的要求的介紹，在進行安裝時要保證風管的安裝需要符合相關的技術要求。在后期的使用中也要保證良好的效果，安裝時也不得損壞保溫層。關注我們http://m.iyammy.cn，了解更多事項!

The above is the introduction of the premise of the construction of the ventilation duct and the requirements of the device. During the installation, it is necessary to ensure that the installation of the air duct meets the relevant technical requirements. Good effect shall be ensured in later use, and the insulation layer shall not be damaged during installation. Follow us http://m.iyammy.cn Yes, learn more!